XGEN: Exchange Client Roving User Support

ID: Q169356


The information in this article applies to:


SUMMARY

This article explains how to set up roving users in Microsoft Exchange Server. It also explains how to define the Exchange Server user profiles for roving users. A roving user is defined as a user who needs to access his or her Exchange account from different workstations, without any loss of mail.

Roving user support is limited to similar operating systems. In other words, a user set up to be a roving user on Windows 3.x, will only be able to access mail from other Windows 3.x workstations. Similarly users set up on Windows 95 will only be able to move to other Windows 95 computers and Windows NT users can only move to other Windows NT computers. A user setup as a roving user on Windows 3.x cannot move to a Windows 95 computer and still retain the Exchange profile. However, once a profile has been setup for the user on each of the platforms, then the user will be able to move to any computer and still have access to his/ her Exchange profile.


MORE INFORMATION

Roving User Support for Windows 3.1 and Windows for Workgroups 3.11

Windows running off the network.

  1. Work with your network administrator to create home directories on the network for each user.


  2. Work with your network administrator to create Windows NT logon scripts that will automatically connect users to their home directory on a network share when they logon to a Windows NT Domain.


  3. Assign these logon scripts to users.


  4. From the Win16 Exchange client share point, run Setup /a to create a network installation of the Win16 client.

    NOTE: You must be logged in with Administrator privilege and must be running the same shared copy of Windows that the users will be running. This is because the Network installation, will add files to the Windows System directory that are required by the Exchange client.


  5. Run the Microsoft Exchange Setup Editor against this network client installation share point, to make any desired changes in the Setup Options a user will see when running the client Setup Program. The Setup Editor can also be used to modify default Exchange user profile information. Save the changes you have made and exit the Setup Editor. This will modify the Setup.stf file in the client network installation directory and create a file called DEFAULT.PRF if it does not already exist.


  6. Each user should be configured to run Windows from the network.


  7. Each user should now run Setup.exe from the Win16 Exchange client network installation point. Select the Workstation installation option. This will install the client so that it runs from the server. The Setup program will now create the user's default profile, based on the settings in the Default.prf file in the client network installation share point. This default profile will be created in the user's home directory on the server, if the user is setup to run Windows from this directory.


  8. Each user should now be able to move any to similarly configured computer, running Windows from the network, and be able to run the Exchange client using the same profile.


Windows running on the local computer.

  1. Work with your network administrator to create home directories on the network for each user.


  2. Work with your network administrator to create Windows NT logon scripts that will automatically connect users to their home directory on a network share when they log on to a Windows NT Domain.


  3. Assign these logon scripts to users.


  4. From the Microsoft Exchange Client CD, run the Setup.exe program to install all the client share points on the a server on the network, from which users will be able to connect to and run the client Setup.exe program.


  5. Run the Microsoft Exchange Setup Editor against the Win16 client share point on the server. Make any desired changes to modify the Setup Options a user will see when running the client Setup Program. The Setup Editor can also be used to modify default Exchange user profile information. Save the changes you have made and exit the Setup Editor. This will modify the Exchng.stf file in the client installation directory on the server and create a file called Default.prf if it does not already exist.


  6. On each client computer, modify the Win.ini file by adding the following line to the [MAPI] section:
    
          ProfileDirectory16=H:
       

    where H: is the path to the user's home directory.

    CAUTION: Adding a backslash (\) at the end of H: could cause the profile generation to fail.


  7. Each user should now run Setup.exe from the Win16 Exchange client network installation point. The Setup program will create the user's default profile, based on the settings in the DEFAULT.PRF file in the client installation share point. This default profile will be created in the directory specified in the ProfileDirectory16 settings in the Win.ini. If this setting does not exist, the profile will be created in the local Windows directory and the user will not be able to access this profile from another computer.


  8. Each user should now be able to move any to similarly configured computer, with the same ProfileDirectory16 setting in the Win.ini file, and be able to run the Exchange client without having to re-create the Exchange client profile.


Roving User Support for MS-DOS

  1. Work with your network administrator to create home directories on the network for each user.


  2. Work with your network administrator to create Windows NT logon scripts that will automatically connect users to their home directory on a network share when they logon to a Windows NT Domain.


  3. Assign these logon scripts to users.


  4. Run the MS-DOS Exchange Client Setup program and select the Shared installation option.


  5. Update each user's Windows NT logon scripts with the following lines:
    
          SET  EXCHANGE = H:\ 
    
          SET RPC_BINDING_ORDER = ncalrpc, ncacn_np, ncacn_tcp, ncacn_spx,
          netbios
       

    where H:\ is the path the users home directory on the network. Depending on the protocols installed on your network, you can modify the RPC Binding Order.


  6. Each user now logs on to the Windows NT domain and then connects to the share point where the MS-DOS Exchange Client has been by the Administrator.


  7. Each user should now run Setup.exe to install the MS-DOS Client, selecting the Workstation installation option. At the end of the setup program, when prompted to modify the Atuoexec.bat file, the user should select the option NOT to modify the Autoexec.bat as this information will conflict with that in the user's logon script.


  8. Each user should now be able to go to any workstation, connect to the share point containing the network installation of the MS-DOS Exchange client and run Exchange.exe to bring up the MS-DOS Exchange client. The user's mail will always be on the server-based store because the MS-DOS client does not permit local .pst files.


Roving User Support for Windows NT and Windows 95

In order to support roving users on Windows NT or Windows 95 computers, MAPI profiles must be stored on a domain controller in a user's home domain so users can access them from anywhere in your organization. If your roving users will use computers in other domains, you must permit the roving users to log on to multiple domains, and those domains must trust the user's home domain.

In addition, for Windows NT, you should work with your network administrator to make sure that your roving users have user rights on the Windows NT computers they intend to use in your organization. If your roving users do not have user rights, they will be unable to log on to the computers they want to use.

To set up roving user support on Windows NT and Windows 95, the administrator must perform the following procedures on a Windows NT Server computer:

Before Windows NT roving users use Microsoft Exchange for the first time, they must:

Before Windows 95 roving users use Microsoft Exchange for the first time, they must:

NOTE: Windows 95 profiles can be stored on any type of server, including a Novell NetWare server.

To create a user profile for a Windows NT roving user:

  1. On your domain's primary domain controller, log on as a domain administrator to the Windows NT Server computer. In the logon dialog box, be sure that the Domain box displays the domain to which you want the account for the roving user to belong.


  2. In the Administrative Tools group, choose User Profile Editor.


  3. On the File menu, click New.


  4. Click the button next to the Permitted To Use Profile box.


  5. In the Names box, select the user account which will have permission to use this profile or type in the name of a user in the Add Name box.


  6. Click Add. The user account appears in the Add Name box.


  7. Click OK.


  8. In the User Profile Editor dialog box, on the File menu, click Save As File. The Save As dialog box appears.


  9. In the Save File As Type box, select Per-User Profile.


  10. In the Directories box, select the path for the profile. It is recommended that you store the profile in a shared user directory for security reasons. The profile can also be stored in a shared public directory.


  11. In the File Name box, type a name for the profile and click OK.


  12. Close the User Profile Editor dialog box.


To specify the path to a Windows NT or Windows 95 roving user's profile:

  1. In the Administrative Tools group, select User Manager for Domains. The User Manager dialog box appears.


  2. Double-click the user account for the roving user.


  3. Click Profile.


  4. In the User Profile Path box, type the UNC path to the .usr file you created in the last procedure. This steps needs to be done only for Windows NT roving users.


  5. In the Home Directory box, click Connect To and type the drive letter and path to the home server where the roving user's profile is located.


To permit a Windows NT or Windows 95 roving user to log on to a different domain:

  1. In the Administrative Tools group, select User Manager for Domains. The User Manager dialog box appears.


  2. On the Policies menu, click User Rights.


  3. In the "Right" box, select Log On Locally.


  4. Select the Show Advanced Users Rights check box and then click Add.


  5. In the List Names From box, select the domain to which you want to add your roving user account.


  6. In the Names box, select the user account for the roving user, and then click Add. The user account appears in the Add Names box.


  7. Click OK.


  8. In the User Rights Policy dialog box, click OK.


  9. Close User Manager for Domains.


To change the working directory for Exchange Server on Windows NT

  1. At the Microsoft Exchange client computer, in the Microsoft Exchange group, select the Microsoft Exchange icon.


  2. On the File menu, click Properties.


  3. In the Working Directory box, type the path of the directory where the roving user's profile is located.


To enable multiple users to personalize their settings on Windows 95:

  1. At the Microsoft Exchange client computer, in Control Panel, click Passwords. The Passwords dialog box appears.


  2. Click User Profiles.


  3. Select the second option, which specifies that users can customize their desktop settings. The first option under User Profile Settings is selected by default. The second option is not required.



Keywords          : kbusage XGEN 
Version           : WINDOWS:4.0,5.0
Platform          : winnt 
Issue type        : 

Last Reviewed: April 16, 1999