How and why ROOTDRIVE is used on Windows Terminal Server

ID: q195950


The information in this article applies to:


SUMMARY

A common issue that is encountered with Terminal Server is that most applications written to date were not written with Terminal Server in mind. In other words, these applications are not natively multiuser. This is not to say that these applications were poorly written, it just illustrates that most applications were written to accommodate a single user running them at one time. Listed below are some of the reasons an application may fail in a multiuser environment, such as Terminal Server:

To work around problems such as these, Terminal Server uses application compatibility scripts. These scripts are essentially batch files that address scenarios such as the ones previously mentioned. Microsoft includes several application compatibility scripts with Terminal Server, located in %SystemRoot%\Application Compatibility Scripts. However, keep in mind that these scripts are examples, and may need to be modified by an administrator for certain environments.

One important concept to understand before implementing these scripts is ROOTDRIVE. To illustrate this idea, consider a fictional word processing application, called ApplicationA:

When UserA installs ApplicationA on a Windows NT Workstation, it adds an entry in the registry for the path to UserA's documents. To do this, the installation program queries for the value of %HOMEDRIVE%%HOMEPATH%. The value returned is entered into the registry, and when a user clicks File and clicks Open inside ApplicationA, the browser window that opens defaults to X:\UserA. This is UserA's home directory, specified in User Manager as Connect X: \\Server\Share\UserA.

When an administrator installs ApplicationA on Terminal Server, the same entry for the path to his or her documents is entered. When 30 different users run ApplicationA, an administrator is not going to want them all to save their documents to the same location. There needs to be a unique location for all users to store their files.

The logical place to store a user's personal files is in his or her home directory. By default, a user's home directory is:

   %SystemRoot%\Profiles\%USERNAME% 
This value is referred to as %HOMEDRIVE%%HOMEPATH%. If Terminal Server is installed to drive C in the default directory \WTSRV, when a user (UserA) logs on who does not have a Home Directory specified in User Manager, his or her home directory will be C:\Wtsrv\Profiles\UserA. This can be seen by typing SET at a command prompt:

   HOMEDRIVE=C:
   HOMEPATH=\WTSRV\PROFILES\UserA 
When a user who has a Home Directory or Terminal Server Home Directory specified in User Manager (Connect X: \\Server\Share\UserA) logs on, the following information is seen when typing SET at a command prompt:

   HOMEDRIVE=X:
   HOMEPATH=\UserA 
Although this is the logical place to store a user's files, there needs to be a way to address this unique path for all users in the registry. The registry entry for the User's documents path in ApplicationA is:

   HKEY_CURRENT_USER\Software\CompanyA\ApplicationA\DefaultPath 
The value of the path cannot be set to %HOMEDRIVE%%HOMEPATH%. Likewise, the value cannot be X:\%USERNAME%. ApplicationA does not understand either of these entries. To work around this issue, ROOTDRIVE is used.

The first time an application compatibility script is run, Rootdrv2.cmd is run, and the person installing the application is presented with the following information:

   REM
   REM   Before running this application compatibility script, you must
   REM   designate a drive letter to be mapped to each user's home
   REM   directory.  Update the "Set RootDrive" statement at the end of
   REM   this file to indicate the desired drive letter.  If you have
   REM   no preference, the drive W: is suggested.  For example:
   REM
   REM            Set RootDrive=W:
   REM
   REM   Note: Make sure there are no spaces after the drive letter and
   REM   colon.
   REM
   REM   When you have completed this task, save this file and exit
   REM   NotePad to continue running the application compatibility script.
   REM 

   Set RootDrive= 
The installer is required to select a drive letter. Any drive letter may be chosen, but it is important that it not be the drive letter specified in User Manager for either the Home Directory or Terminal Server Home Directory (in this example, X was used for UserA's home directory). Furthermore, the installer should not choose a drive letter that is used in a logon script. In this scenario, the person installing ApplicationA decides to use the suggested drive letter W:.

The application compatibility script that was originally run is now called, and all appropriate changes contained within the script are implemented. In this case, the value of

   HKEY_CURRENT_USER\Software\CompanyA\ApplicationA\DefaultPath 
is now set to W:\, because this is the drive letter chosen to be ROOTDRIVE. The easiest way to think of this is ROOTDRIVE = %HOMEDRIVE%%HOMEPATH%. When UserA logs in, his or her drive W = \\Server\Share\UserA. When UserB logs in, his or her drive W = C:\WTSRV\PROFILES\UserB, because he or she does not have a home directory specified in User Manager. When UserA starts ApplicationA, he or she stores all of his or her documents in drive W, as does UserB. Both users' documents, however, are in different places, which is the original issue that needed to be addressed.

ROOTDRIVE is connected by using the Usrlogon.cmd script. This script is run each time a user logs on to the Terminal Server. The script is called from the following location:

   HKEY_LOCAL_MACHINE\Software\Microsoft\WindowsNT\CurrentVersion
   \Winlogon\Appsetup 
NOTE: The above registry key is one path; it has been wrapped for readability.

Listed below is the portion of Usrlogon.cmd that connects ROOTDRIVE:

   Rem
   Rem Map the User's Home Directory to a Drive Letter
   Rem 

   Net Use %RootDrive% /D >NUL: 2>&1
   Subst %RootDrive% /d >NUL: 2>&1
   Subst %RootDrive% %HomeDrive%%HomePath% 
The first line is a NET USE statement that deletes any drive letter that currently exists that is using the drive letter that was chosen for ROOTDRIVE. The second line is a SUBST command with a /d switch that deletes any substituted drive you have that has the same letter as the drive letter that was chosen for ROOTDRIVE. Finally, the third line runs the SUBST command for %HOMEDRIVE%%HOMEPATH% with the drive letter that was chosen for ROOTDRIVE.

As illustrated, ROOTDRIVE is an important feature of Windows NT Server version 4.0, Terminal Server Edition. Because of the fact that most applications written to date were not written with a multiuser environment such as Terminal Server in mind, some issues can be addressed by using application compatibility scripts in conjunction with ROOTDRIVE.

Additional query words:


Keywords          : 
Version           : WinNT:4.0
Platform          : winnt 
Issue type        : kbinfo 

Last Reviewed: July 15, 1999